How To Order
About Us -
- Multi-Ripper Artwork
Hi-Cap Multi-Ripper Bucket
Multi-Ripper Talon Bucket
DigNRip Bucket -
Skid Steer Multi-Ripper
Straight Rake -
Breaks rock and frost 4 times
faster than a hammer,
at a fraction of the cost.
All of the Multi-Ripper Products utilize the patent pending SharcTM Technology which results in the unit funcioning similarly to that of a trencher except they use the machine rolling action to rip. The staggered shanks fracture the substrate in sequential order. No two shank tips align with each other, so that the maximum breakout force is applied sequentially to each tip. The distance from the boom pivot to the tooth tips is also considerably shorter than the standard bucket for the machine. The shorter distance actually multiplies the tip force. The castle top shape groves cut by the forward tip facilitates the fracturing process of the next tip. The rolling of the Multi-Ripper products, by extending the tool cylinder, always provides the full multiplied breakout force individually on each tip so that the substrate is ripped out by each individual tip lifting action. The result is a relatively flat trench bottom due to the fact that the tooth tips all lie on a constant radius with a center of rotation that is close to tool pivot. The multiple teeth also push the loosened material out of the way to expose un-ripped material. The Multi-Ripper Products are the most productive attachments available by comparison!
You benefit because....
Breaks rock up to 4 times faster than a hammer!
Rips frost 10 times faster than a single pointed ripper!
Exceeds all other designs of frost, rock or ripper buckets on the market!
Is the undisputed best combination ripper and bucket on the market!
Rips all depthes of frost or fragmented rock!
Rips trench walls flat and square!
Leading Edge Attachments,
(TM), (R), (C) Copyright ; 2002-2013 LEA, Inc.; All rights reserved.
Revised: May 21st, 2013